manualshive.com logo in svg

Webee Wireless N Router with 3G Modem Support, User Manual, Page: 37 / 91

Share
Download
Webee Wireless N Router with 3G Modem Support User Manual Download Page 37

 
 
USER MANUAL OF WEBEE WIRELESS N ROUTER  

 

Version:1.1 

Firmware Type 2  

P/N: 60291092 

 

37

 

 

 

 

4.3.12 Schedule 

 

This page is to configure the wireless activation timestamp by users. 
 

 

 

Item 

Description 

 

 

Enable Wireless Schedule  Click on to enable the wireless schedule function. 
Days 

Click the one or more of days to set the rules. 

Time 

Click 24 hrs or set the starting time and ending time. 

Apply Changes 

Click the 

Apply Changes

 button to complete the new configuration 

setting. 

Reset Click 

the 

Reset 

button to abort change and recover the previous 

configuration setting. 

 

4.3.13  LAN Interface Setup 

This page is used to configure the parameters for local area network that connects to the 
LAN ports of your Webee Router. Here you may change the setting for IP address, 
subnet mask, DHCP, etc. 
 

Summary of Contents for Wireless N Router with 3G Modem Support




























































































Reviews:

No comments