Webee Wireless N Router with 3G Modem Support, User Manual, Page: 14 / 91

USER MANUAL OF WEBEE WIRELESS N ROUTER
Version:1.1
Firmware Type 2
P/N: 60291092
14
Properties button.
4 Move mouse and click General tab, select Specify an IP address and type
in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to
192.168.1.253 is good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
5. Click OK to complete the IP parameters setting.
For OS of Microsoft Windows 7:
1 Click the Start button and select Control Panel . The Control Panel window
will appear.
2 Move mouse and click the Network and Sharing Center item. Click
Change
adapter settings
. The Local Area Connections icon will appear. Double
click the Local Area Connection icon, then Local Area Connection Status
window will appear. Click Properties button to set properties.
3 In the Local Area Connection Properties window, select Networking tab,
move mouse and click Internet Protocol Version 4 (TCP/IPv4) , then click
Properties button.
4 Move mouse and click General tab, select Use the following IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to
192.168.1.253 is good to connect the Wireless LAN Access Point.
9
Subnet Mask:
255.255.255.0
5. Click OK to complete the IP parameters setting.
4.2. CONNECT TO THE ROUTER
Open your WEB browser and then enter
192.168.1.254
on the URL to connect the
Router.
4.3. MANAGEMENT AND CONFIGURATION ON THE ROUTER
4.3.1 Status
This page shows the current status and some basic settings of the device, including
system, wireless, Ethernet LAN and WAN configuration information.