Webee Wireless N Router with 3G Modem Support, User Manual, Page: 38 / 91

USER MANUAL OF WEBEE WIRELESS N ROUTER
Version:1.1
Firmware Type 2
P/N: 60291092
38
Item Description
IP Address Fill in the IP address of LAN interfaces of this WLAN Access Point.
Subnet Mask Fill in the subnet mask of LAN interfaces of this WLAN Access Point.
DHCP Click to select Disabled , Client or Server in different operation mode
of wireless Access Point.
DHCP Client Range Fill in the start IP address and end IP address to allocate a range of IP
addresses; client with DHCP function set will be assigned an IP
address from the range.
Show Client Click to open the Active DHCP Client Table window that shows the
active clients with their assigned IP address, MAC address and time
expired information.
[Server mode only]
Static DHCP Select enable or disable the Static DHCP function from pull-down
menu.
[Server mode only]
Set Static DHCP Manual setup Static DHCP IP address for specific MAC address.
[Server mode only]
Domain Name Assign Domain Name and dispatch to DHCP clients. It is optional field.
802.1d Spanning Tree Select enable or disable the IEEE 802.1d Spanning Tree function from
pull-down menu.
Clone MAC Address Fill in the MAC address that is the MAC address to be cloned. Refer to
4.24 What is Clone MAC Address?
Apply Changes Click the Apply Changes button to complete the new configuration
setting.
Reset Click the Reset button to abort change and recover the previous
configuration setting.