6
The floor must be strong enough to support a load equal to the weight of the equipment plus
the maximum load allowed.
The machine must not be operated in potentially explosive atmospheres.
SAFETY REGULATIONS
Failure to comply with the instructions and danger warnings can cause serious injuries to the
operator or other persons.
Do not operate the machine until you have read and understood all the danger/warning notices
in this manual.
The correct use of this machine requires a qualified and authorized operator. This operator
must be able to understand the manufacturer's written instructions, be suitably trained and be
familiar with the safety procedures and regulations. Operators are forbidden to use the
machine under the influence of alcohol or drugs that could affect his/her physical and mental
capacity.
The following conditions are essential:
- read and understand the information and instructions described in this manual;
- have a thorough knowledge of the features and characteristics of the machine;
- keep unauthorized persons well clear of the working area;
- make sure that the machine has been installed in compliance with all relevant standards and
regulations in force;
- make sure that all machine operators are suitably trained, that they are capable of using the
machine correctly and safely and that they are adequately supervised during work;
- do not touch power lines or the inside of electric motors or any other electrical equipment
before making sure that they have been powered off;
- read this booklet carefully and learn how to use the machine correctly and safely;
- Always keep this user manual in a place where it can be readily consulted and do not fail to
refer to it.
Do not remove or deface the DANGER, CAUTION, WARNING or INSTRUCTION decals.
Replace any missing or illegible decals. If any decals have become detached or damaged, it is
Summary of Contents for W-957-40
Page 1: ...1 ...
Page 38: ...38 APPENDIX 1 POWER DOARD LAYOUT ...
Page 39: ...39 APPENDIX 2 CIRCUIT SCHEME ...
Page 40: ...40 ...