Brine Nebulization System, Type Soldos V3
Index: 03
Change date: 01/03/2017
Operating instructions no.: BA DW 005-03 Soldos V3 EN.docx
Page 24 of 70
The rinsing process is completed.
Rinsing must be repeated in the event of a fault message.
Remove the nozzle adapter (19) on the nozzle of the respective room after
rinsing was successful.
It is recommended to clean the room thereafter.
The device is now appropriately disinfected and rinsed and therefore ready for
operation.
Rinsing and disinfection activities are logged by the data logger.
5.2.2
Rinsing activation
Proceed as follows when you want to perform rinsing without disinfection. Call up
Rinsing by selecting Menu
Service menu
Disinfection .
Press the
lower
Start button to start rinsing.
Summary of Contents for Soldos V3
Page 72: ......
