MF Freezer
Operating manual
WCB Ice Cream
19-29
Dasher Motor Amperage
On this screen you set the nominal amperage of the dasher motor. This value can be seen on the
motor nameplate. The parameter is used by the control system to calculate the dasher load.
By pressing K7 (Arrow) up you increase the parameter and by pressing K8 (Arrow Down) you
decrease the parameter. Keeping the keys pressed will make the adjustments go faster and faster.
The parameter adjustment is immediately being stored. There is no need for acknowledging the
adjustment.
If you press K5 (Escape) you will return to the previous Dasher parameter by pressing K10 (Enter) you
will go to the next adjustable Dasher Parameter:
Dasher Wire Turns
On this screen you tell the control system how many times one of the dasher motors power wired is
turned through the current transducer. Nameplate. The parameter is used by the control system to
calculate the dasher load.
By pressing K7 (Arrow) up you increase the parameter and by pressing K8 (Arrow Down) you
decrease the parameter. Keeping the keys pressed will make the adjustments go faster and faster.
The parameter adjustment is immediately being stored. There is no need for acknowledging the
adjustment.
If you press K5 (Escape) you will return to the previous Dasher parameter. By pressing K10 (Enter)
you will go to the next adjustable Dasher Parameter:
