WBM KOMATSU GD655-6, Manual, Page: 39 / 82

Weldco-Beales Manufacturing Page 39
WBM
MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
OPERATION
FUNCTIONS, TO RAISE THE SNOW WING FOR TRANSPORT
To Raise the Snow Wing for Transport
1. Set the moldboard stop to its outermost position.
2. Start the grader engine and run at low idle.
3. Ensure all personnel and property are clear before operating the snow wing.
4. Raise the snow wing moldboard to full height by raising the snow wing lift-frame.