WBM KOMATSU GD655-6, Manual, Page: 15 / 82

Weldco-Beales Manufacturing Page 15
WBM
IF REQUIRED TO INSTALL THE LADDER,
REMOVE THE SHEET METAL BRACKETS
AND TRIM THE SHEET METAL.
HHCS M12 X 1.75 X 40.00MM X 10.9
12 MM WASHERS
12.00 X 1.75 X 10.9 NUTS
LADDER SPACER
6. Install the ladder spacer, using four HHCS M12 X 1.75 X 40.00 mm X 10.9 bolts, eight
12 mm washers and four 12.00 X 1.75 X 10.9 nuts. Torque bolts to specifications in the
appendix.
Finish installing the snow wing before installing the ladder onto the spacer.
MSW102 SNOW WING
PARTS, SERVICE AND INSTALLATION
ASSEMBLY AND INSTALLATION
COMPONENT INSTALLATION