You can reach us Toll Free at
1-888-827-3667
for Consumer Assistance or online at
www.wayne-dalton.com
Please Do Not Return This Product To The Store.
Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
25
TO AVOID ELECTRICAL SHOCK
DISCONNECT POWER TO THE
RECEPTACLE AT THE FUSE/BREAKER
BOX, BEFORE PROCEEDING WITH THE
INSTALLATION OF THE LIGHT FIXTURE.
IMPORTANT!
This light fixture has a
grounding type plug with a third
(grounding) pin. This plug will only fit into
a grounding type outlet. If the plug does
not fit into your outlet, contact a qualified
electrician to install the proper outlet. DO
NOT alter the plug in any way.
TO AVOID ELECTRICAL SHOCK/FIRE, DO
NOT INSTALL THE LIGHT FIXTURE INTO A
RECEPTACLE WITH A METAL FACE
PLATE.
IMPORTANT!
Door must clear Light
Fixture when the door is in the open
position.
The Light Fixture is designed to mount
directly to a standard 120V Duplex
Receptacle. Remove center Hole Plug
from Light Fixture (if installed) to expose
the Screw Hole.
Remove the center screw in the
Receptacle Cover. Holding Receptacle
Cover in place, insert Light Fixture into
the Receptacle that has the ground hole
farthest from center screw hole.
Secure Light Fixture to receptacle with a
#6-32 x 3/4” Phillips Pan Head Screw.
Replace Hole Plug into the Screw Hole in
the Light Fixture.
NOTE:
For temperature protection, the
Hole Plug must be in place prior to using
the Light Fixture.
Positioning the Light Fixture
Tools Needed:
Phillips head
screwdriver
Flat Tip
Screwdriver
Receptacle Cover
#6-32 x 3/4”
Phillips Pan Head
Screw
Hole Plug
Remove Screw
15
WARNING
WARNING
