Power Receptacle
Opener
6’ Power Cord
26
27
Screw a 75W (maximum) light bulb into
Light Socket and snap Diffuser into Light
Fixture.
When assembling Diffuser, make sure
all three Snap Tabs are aligned and fully
snapped into the three Mating Slots of
the Light Fixture.
Turn Receptacle power back on at fuse/
breaker box. The light should blink one
time when the power is turned back on.
NOTE:
An accessory power outlet
receptacle (600 Watt Maximum) is
provided as part of the light fixture.
Attaching Diffuser
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT ALTER THE PLUG IN ANY
WAY.
Plug the end of the Power Cord into the
nearest grounded power receptacle. (If the
Power Cord is not long enough to reach the
closest receptacle, contact a service person
for further options.) As soon as power is
applied to the Opener the Opener will beep
twice.
Excess Power Cord length must be routed
and contained safely away from any moving
parts.
NOTE:
Do not permanently attach Power
Cord to building! Use only the Power Cord
Clips supplied with the Opener.
NOTE
: If the 6’ power cord will not reach an
electrical outlet, contact a local electrician
for further options.
NOTE:
If permanet wiring is dersired, skip to
Step 39 for instructions.
Connecting Opener Power Cord
Tools Needed:
Phillips head
screwdriver
Light Fixture
Diffuser
75W (MAX)
Light Bulb
(Not Included)
Plastic Clip
#6 x 7/8”
Pan Head Screw
Power Outlet
Snap Tabs
Mating Slots
16
WARNING
None
Tools Needed:
You can reach us Toll Free at
1-888-827-3667
for Consumer Assistance or online at
www.wayne-dalton.com
Please Do Not Return This Product To The Store
Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need