Tools Needed:
You can reach us Toll Free at
1-888-827-3667
for Consumer Assistance or online at
www.wayne-dalton.com
Please Do Not Return This Product To The Store.
Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts You May Need
Thread the Disconnect Cable Guide
Bracket onto the Disconnect Cable
making sure the proper hole is used.
• For 2” to 2-1/8” torsion tube to header
offset, use the hole closest to the
flange.
• For 2-7/8” torsion tube to header
offset, use the hole farthest from the
flange.
NOTE:
Depending on the type of door
hardware present, it may be necessary
to drill a hole in the right side flagangle
and/or End Bearing Bracket for routing
the Disconnect Cable.
Threading Disconnect Cable
Guide Bracket
9
10
Attaching Disconnect Cables
Attach the loose Disconnect Cable, from
the hardware kit, to the attached
Disconnect Cable using the “S” Hook.
Close both ends of the “S” Hook to lock
the cables together.
None
Tools Needed:
Pliers
Close S-Hook
2-7/8” offset
2” offset
2-1/8” offset
Disconnect Cable
Guide Bracket
Flagangle
5
2”- 2-7/8”
Min
Mounting Surface
Top View
Disconnect Cable
Guide Bracket
