Waxess DM1000 User Manual Download Page 4

Page: 4 / 54

D mode CT User Guide

Introduction

The D Mode CT is a unique, all-in-one cellular

and

landline

communications device. This new product addresses the

fast-paced convergence of landline and cellular, as well as

transition from landline usage to cellular service usage at home.
This innovative product combines landline (in the home) phone

service with cellular (mobile) phone service. With this one device,

you can now make and receive phone calls at home using your

traditional home phone service or your mobile cellular service.

The competitive landscape of the cellular industry has driven

down the cost of cellular service. Now, you can have that

affordable pricing in your home.
With its higher power, the new D Mode CT safely provides

uninterrupted phone service in your home. No more dead spots.

No more sporadic disconnects. You can roam freely around the

house using a standard 2.4GHz cordless handset while using your

cellular service.

• FEATURES

• Compatible with GSM network

• 2.4GHz DSS Multiple Handset Cordless Telephone
• Up to 2 watts of power for maximum cellular connectivity

• Expandable up to 4 cordless handsets
• 3-way conference with cellular and landline
• Caller ID from both cellular and landline services

• 50 number phone book and 50 number Caller ID memory
• Speakerphone on base with dual keypad
• Voicemail access for both cellular and landline

• Send and receive SMS

• Power backup battery (optional)
• Corded handset on base
• Large orange backlit LCD
• 5 number redial memory with up to 32 digits each

*1 To use these features, you must subscribe to appropriate services with

your service provider.

*2 Cellular power depends on the wireless service provider and their network

service configuration.

• WEB SITE

Web site: http://

www.waxess.com

D mode CT user guide final.book Page iv Tuesday, May 24, 2005 6:57 PM

Summary of Contents for DM1000




















































Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands

Waxess DM1000, User Manual

Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands