Waxess DM1000 User Manual Download Page 39

Page: 39 / 54

D Mode CT User Guide

Use Barge-In

Verify that Barge-In is activated, then use one handset to

place a call.

After the call is answered, press

TEL

on any handset to join

the call.

• Cellular only

When activated on the base, the Cellular Only mode enables up

to four cordless handsets to join in a conference call on the

cellular line (CEL) call. Activating Cellular Only automatically

deactivates the landline, so the

TEL

icon on the LCD does not

appear.

Set up Cellular only

Disconnect the telephone cord from the base.

Press

MENU

, scroll to

Setup

, and press

Select

Scroll to

Cellular Only

, and press

Select

Scroll to

, and press

Select

A tone confirms the choice, and the Setup menu appears.

Note:

With Cellular Only activated, privacy may be compromised.

Any registered cordless handset can join the call, but there

is no indication that another handset has joined the call.

Turn off Cellular only

If landline services are needed, deactivate this feature first.

Connect the telephone cord.

Press

MENU

, scroll to

Setup

, and press

Select

Scroll to

Cellular Only

, and press

Select

Scroll to

Off

, and press

Select

A tone confirms the choice, and the Setup menu appears.

• Power back-up

Power back-up for the base is an optional feature (not required to

operate this product) that allows the base to operate for up 30

minutes even (depending on battery condition) if AC power is

disrupted. If you install batteries for the Power Back-up feature

you can check the condition of the batteries while they are

installed.

D mode CT user guide final.book Page 33 Tuesday, May 24, 2005 6:57 PM

Summary of Contents for DM1000




















































Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands

Waxess DM1000, User Manual

Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands