Waxess DM1000 User Manual Download Page 11

Page: 11 / 54

D Mode CT User Guide

phone is idle. At the bottom of the screen, the text indicates

which service lines are active.

CEL

is wireless service, and

TEL

landline service.

If you have connectED with your cellular service provider, the

date and time may be set automatically. If not, see the next

section to set the date and time manually.

Signal level

The Signal Level feature helps you find your strongest cellular

service signal.

Press

MENU

, then repeatedly press to highlight

Setup

and

press

Select

Repeatedly press to highlight

Signal level

, and press

Select

Move the base around your location

to find the strongest signal level.

Ready the cordless handset

INSTALL THE BATTERY

Open the cover.

Verify that the

connector is properly

aligned with the jack

and connect the

battery.

Note:

The connector is

designed to easily

fit the jack in only

one direction. Do

not use excessive

force.

D mode CT user guide final.book Page 5 Tuesday, May 24, 2005 6:57 PM

Summary of Contents for DM1000




















































Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands

Waxess DM1000, User Manual

Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands