Waxess DM1000 User Manual Download Page 14

Page: 14 / 54

D mode CT User Guide

Enter the correct minutes, and press

The AM/PM screen appears.

Use the or key to set AM or PM and press

The time format setting appears.

Use the or key to set the time format and press

The date screen appears with months showing.

Use the keypad to enter the correct month.
After entering the month, the cursor moves to the day.

Enter the correct day then press

The cursor appears on the first digit of the current year

setting.

Use the keypad to enter the four digits for the correct year and

press

The date format appears.

Press or to select a format and press

You hear a confirmation tone and the Main menu appears.

When the time and date are set on the base or on one of the

cordless handsets, the time and date for all other components

(handset or base) automatically synchronize after a few minutes.

If a new cordless handset is added and properly registered, the

time and date for the new handset will automatically synchronize.

• Set the ringer tone

You can set different ring tones for CEL (wireless) calls and TEL

(landline) calls.

Press

MENU

Scroll to

Ringer/Key Beep

, and press

Select

Scroll to

Ringer Tone

, and press

Select

The ringer tone menu for CEL calls appears first. The current

ringer tone is highlighted.
The base has three ring tones available. The handset has six

rings available—three tones and three melodies.

Note:

Melodies are only available on the cordless handset.

Scroll through the list of tones.

Pause on a tone name to hear a short sample of the tone. The

sample plays two seconds for a ring tone and 10 seconds for

a melody.

Press

Select

D mode CT user guide final.book Page 8 Tuesday, May 24, 2005 6:57 PM

Summary of Contents for DM1000




















































Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands

Waxess DM1000, User Manual

Search results

Summary of Contents for DM1000

Reviews:

Related manuals for DM1000

Brands by name

Popular brands