Wavion WS410, Installation Manual

Page: 32 / 66

Installing the Wavion WS-410 Metro Access Point
32 Wavion
NEMA plug, for streetlight photoelectric control power tap (2-wire service) —2W(2P) or
2W(P+N); 100-240 VAC 50/60 Hz. See
Chapter 7: Installation Accessories on page 53 for
details.
Figure 3.19. Connecting Streetlight Power
To connect a streetlight power source
1.
Verify that the service voltage is the following:
•
NEMA plug, for streetlight photoelectric control power tap (2-wire service) —2W(2P) or
2W(P+N); 100-240 VAC 50/60 Hz. See
Chapter 7: Installation Accessories on page 53 for
details.
2.
Make sure that the power is turned off on the designated circuits.
3.
Remove the photosensor from the streetlight.
W
ARNING
:
Connect the WS410 only to a twist-lock style outdoor lighting control
powered by 100
-240 VAC 50/60 Hz
. Do not connect it to twist-lock style outdoor
lighting controls powered by higher voltage. If the street light is sourcing 480VAC, a
special step-down power tap adaptor must be used.
W
ARNING
:
Be extremely careful when connecting to Category C streetlight power.
AC power from
power adapter on
photosensor