Wavion WS410, Installation Manual

Page: 34 / 66

Installing the Wavion WS-410 Metro Access Point
34 Wavion
The figures below show the options for routing cables to the Wavion WS-410. Connect the
Ethernet cable to the appropriate data port (ETH A or ETH B).
Figure 3.20. Data Port Connection Options
When connecting to the Ethernet port, if you need to terminate the Ethernet cable, use a
standard RJ45 termination. Use a shielded RJ45 plug and be sure to connect the shield of the
Ethernet cable to the shield of the RJ 45 plug.
To connect to the data port
1.
Make sure that the power is turned off for the designated circuits.
2.
Run shielded Category 5 Ethernet cable appropriate for outdoor use from a data
protection unit to the Wavion WS-410.
ETH A port
ETH B port