Installing the Wavion WS-410 Metro Access Point
16 Wavion
Metal or Wood Pole Mounting
shows the correct way to mount the Wavion WS-410 on an outdoor metal or wood
pole.
Figure 3.3. Mounting on a Pole
To mount the Wavion WS-410 on a metal or wood pole
1.
Choose a mounting location. You can attach the WS-410 to any pole or pipe with diameter
of 3-10 inches.
2.
Slip the bands of the hose clamps through the inner slots of the pole bracket. Choose the
slot that is appropriate for the diameter of the mast.
3.
Use the hose clamps to fasten the pole bracket to the pole.
4.
Attach the back plate to the hose bracket as labeled #1 in
N
OTE
:
Antennas must be higher than the top of the pole and clear of any
obstructions.
N
OTE
:
The hose clamps supplied support a mast diameter of 3-6 inches. You can
supply your own hose clamps if you need a different size.
Summary of Contents for WS410
