Wavion WS410, Installation Manual

Page: 20 / 66

Installing the Wavion WS-410 Metro Access Point
20 Wavion
3.
Slide the WS-410 onto the tray. Insert three 8mm stainless steel hex head machine bolts
from underneath the tray into the WS-410. Use a 5mm Allen wrench to tighten the bolts.
Figure 3.9. Attaching the WS-410 to the Tray
To continue installing the WS-410, see Grounding the Wavion WS-410 on page 22.
Streetlight Mounting
You can mount the Wavion WS-410 on the horizontal or angled arm of a streetlight.
To mount the Wavion WS-410 on a streetlight
1.
Choose a mounting location. You can attach the WS-410 to any streetlight arm with
diameter of 3 to 10 inches.
2.
Slip the bands of the hose clamps through the inner slots of the pole bracket. Choose the
slot that is appropriate for the diameter of the mast.
3.
Use the hose clamps to fasten the pole bracket to the pole.
4.
Attach the back plate to the pole bracket as labeled #1 in Figure 3.10
N
OTE
:
The hose clamps supplied supports a mast diameter of 3-6 inches. You can
supply your own hose clamps is you need a different size.
Insert
bolts