Wavion WS410, Installation Manual

Page: 21 / 66

Installing the Wavion WS-410 Metro Access Point
Installation Guide 21
5.
Insert the six bolts into the holes in the back plate labeled #2 in Figure 3.10 and tighten.
Figure 3.10. Attaching the Back Plate to the Pole Bracket
6.
Attach the tray to the back plate as shown in Figure 3.11 .
7.
Insert four 8mm stainless steel hex head machine bolts into the tray. Tighten the bolts
using a 5mm Allen wrench.
Figure 3.11. Attaching the Tray to the Back Plate
N
OTE
:
The tray must be parallel to the ground. The tray can be rotated to obtain the
correct position.
2
2 2
2
2
2
1
1
Insert bolts