Warranty and Other Information
Warranty:
WaveWare Technologies, Inc. warrants this equipment to operate properly for a period of one year from date
of shipment from WaveWare Technologies, Inc.
Warranty includes parts and WaveWare factory labor, but does not
include shipping charges. The warranty becomes void if the equipment is physically damaged by any external events.
Disclaimer:
This equipment has not been designed to operate as a primary means of life/safety communications, and
should only be used as a secondary means of communications. The nature of radio paging is such that alert messages
are not guaranteed to be delivered to pagers, due to a variety of causes, some of which are out of the control of the
equipment manufacturer and the user of the equipment. The WaveWare paging equipment uses a one-way radio paging
protocol called
POCSAG
, which relies upon proper operating frequency coordination and licensing, proper external
environmental conditions, and proper equipment maintenance, in order to deliver messages to pagers in a reasonably
reliable manner.
WaveWare Technologies, Inc. is not liable for damages caused by failure of delivery of messages from
WaveWare equipment to pagers, beyond the normal warranted equipment repair or replacement during the warranty
period.
Note:
This equipment has been tested and found to comply with the limits for a “Class A” digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at “His Own Expense”.
Changes or modifications to the equipment not
expressly approved in writing by WaveWare Technologies, Inc. could void the user’s authority to operate the equipment
and void the warranty.
Site Licensing:
This equipment, when attached to a radio transmitter, requires a site license from the FCC in order to be
operated. The site licensing can be obtained through several means, including
Shared-Use Site Licensing from
WaveWare and FCC Site Licensing through WaveWare
. Directly from FCC licensed Frequency Coordination agencies, or
from anyone that can help you fill out the proper FCC forms payment submittal requirements. Good for the USA Only.
Other Information
Versions of the Encoder Programming Software
The
Version
number of the Paging System is written on the
Front Cover
of the
Paging System.
The
v
9
Encoder Programming Software is
ONLY
for the
SPS-5
v
9
“Series”
Paging Systems and is not compatible with
any other encoder board version.
The
v
8
Encoder Programming Software is
ONLY
for the
SPS-5
v
8
Paging System and is not compatible with any other
encoder board version.
The
v
7
Encoder Programming Software is
ONLY
for the
SPS-5
v
7
Paging System and is not compatible with any other
encoder board version. All Dip Switches MUST be in the ON Position when using this Software Version for Best Results.
NOTE:
The v4, v5, v6 and the v7 SPS-5 Encoder Systems are
All Discontinued
and are
No Longer
Supported.
All Encoder Programming Software for versions 9, 8, and 7 are available on the WaveWare Website at:
http://www.wirelessmessaging.com/SPS-5_Software.html
“Obtaining Pagers for your System” is Next…
