Page 23 –
Single Com Port
Settings for the v
9
S
Single
Com Port System
Encoder Settings
The “
Advanced Settings
” Button will give you more Options.
Below are the “
Encoder Settings
” screen for the Com Ports and Protocols.
NOTE:
Defaults are shown below.
Fig. 14
A
When Finished,
Click
“OK”.
Encoder Settings:
A:
Protocol for the Com Port
Choices are TAP, PET and TAP, COMP1, COMP2,
WaveWare and Scope.
B:
Settings for the Com Port
Choices are Verbose or Non-Verbose and Baud
Rates of 300, 1200, 2400 and 9600 with Connection
Settings of N 8, E 7 or 0 7.
C:
Restore Defaults Button
Click on this Button to “Restore” Settings to
Factory Defaults.
D:
Advanced Encoder Settings Button
Click on this Button to open the “Advanced” Encoder
Settings Screen for more Options. See next page.
Fig. 14
A
(Factory Defaults Shown)
SPS-5 v
9
S Single
Com Port Settings Screen
For
v
9
S Single
Port System Configuration
Advance
Settings: (See Next Page).
