WaveWare SPS v9S, Manual

Page: 21 / 57

Page 21 – Dual Com Port
The “ Advanced Settings ” Button will give you more Options.
The “ Restore Defaults ” Button will “ Reset ” Both Com Ports to “ Defaults ”.
Below are the “ Encoder Settings ” screen for the Dual Com Ports and Protocols.
When Finished,
Click “OK”. See Fig. 14
Fig. 14 (Default Settings)
SPS-5 v 9 Dual Com Port Settings Screen
Encoder Settings:
A:
Protocol for the 1
st
Com Port
Choices are TAP, PET and TAP, COMP1,
COMP2, WaveWare and Scope.
B:
Settings for the 1
st
Com Port
Choices are Verbose or Non-Verbose and
Baud Rates of 300, 1200, 2400 and 9600 with
Connection Settings of N 8 or E 7.
C:
Advanced Encoder Settings Button
Click on this Button to open the “Advanced”
Encoder Settings Screen for more Options.
See next page.
D:
Protocol for the 2
nd
Com Port
Choices are TAP, PET and TAP, COMP1,
COMP2, WaveWare and Scope.
E:
Settings for the 2
nd
Com Port
Choices are Verbose or Non-Verbose and
Baud Rates of 300, 1200, 2400 and 9600 with
Connection Settings of N 8 or E 7.
F:
Restore Defaults
Clicking this Button will Reset BOTH Com
Ports to Default Settings.
For System Configuration of Advance Settings: (See Next Page).