User Guide
Hotec Wireless Microphone
Model: H
Thanks for purchasing Hotec UHF Wireless
microphone, please read the following
instructions carefully before use.
Email: support@sz
Website: www.sz-
FB page: https://www.facebook.com/Hotechome
Or scan the QR code
Hotec
®
is the registered trademark of Shenzhen Tecson Trade and Technology Co.,
Ltd.
H-U26C
User Guide
Hotec Wireless Microphone
Model: H-U06C / H-U26C
Thanks for purchasing Hotec UHF Wireless
microphone, please read the following
carefully before use.
-hotec.com
https://www.facebook.com/Hotechome
Or scan the QR code
is the registered trademark of Shenzhen Tecson Trade and Technology Co.,
H-U06
User Guide
Hotec Wireless Microphone
Thanks for purchasing Hotec UHF Wireless
microphone, please read the following
https://www.facebook.com/Hotechome
is the registered trademark of Shenzhen Tecson Trade and Technology Co.,
U06C
2
SYSTEM CONTENT
H-U2618
H-U06C
H-U06C Handheld microphone x 1
H-U06C Mini rechargeable receiver x 1
Charging cable x 1
AA battery x 2 (for microphone)
Rechargeable battery x 1 (for receiver)
Microphone foam x 1
Anti-rolling ring x 1
H-U26C
H-U26C Handheld microphone x 2
H-U26C Mini rechargeable receiver x 1
Charging cable x 1
AA battery x 4 (for microphone)
Rechargeable battery x 1 (for receiver)
Microphone foam x 2
Anti-rolling ring x 2
3
PRODUCT INTRODUCTION
Hotec UHF wireless microphone works at
902-928MHz, total 32 selectable frequencies
for choice for H-U06C and 64 frequencies for
H-U26C, 32 for each channel. The handheld
microphone system with mini rechargeable
battery is perfect for vocal transmission over
PA, mixer console, PA speaker and amplifier.
The handheld microphone for H-U06C/H-U26C
is powered by AA batteries and the receiver is
powered by large capacity rechargeable
battery.
PREPARATION BEFORE USE
a)
Charge and install battery for mini receiver
Open the battery compartment of the
receiver to check if the rechargeable battery is
installed in place. Make sure the receiver is
fully charged before use. Charging time for
4
the mini receiver is about 4 hours. The
receiver works up to 10-15 hours after fully
charged.
When the battery is low, the battery indicator
becomes red. It is blue color during charge
and the light will be off after fully charged.
b)
Install batteries for microphone
Open the battery compartment of the
handheld microphone, install the AA
batteries.
c)
Check and make sure the microphone and
receiver are connected
Power on both mini receiver and the
handheld microphone. Make sure the mic and
receiver are paired. If you see the following
indicator color, the mic and receiver are
paired and you are ready to use after you
connect it to your audio device.
