WM_MKT_Fastrack_UGD_001 - 002
September 2002
8 Notice to OEM’s
A minimum separation of 20 cm must be maintained between the antenna and persons for
this device to satisfy the RF exposure requirement of the FCC. For fixed mount operation, the
antenna co-location requirements of section 1.1307(b)(3) of the FCC rules must be satisfied. For
fixed mount operation, the maximum gain of the antenna must not exceed 7 dBi. For mobile
operation, the maximum gain of the antenna must not exceed 3 dBi.
WARNING! Use of this module in portable operations is not permitted.
Wavecom User’s manual includes specific warnings and cautions in order to ensure that
OEMs are aware of their responsibilities, with regards to RF exposure compliance, for products into
which the modem is integrated. With this guidance, the OEM will be able to incorporate into their
documentation the necessary operating conditions and warnings.
OEMs need to provide a manual with the ‘’final’’ product that clearly states the operating
requirements and conditions and that these must be observed to ensure compliance with current
FCC RF exposure requirements / MPE limits (refer to chapter 7. RF exposure instructions). This will
enable the OEM to generate (and provide the end-user with) the appropriate operating instructions,
warnings and cautions, and/or markings for their product.
Licensed module must have an FCC ID label on the module itself. That FCC ID label must be
visible through a window on the final device or it must be visible when an access panel, door or
cover is easily removed. If not, a second label must be placed on the outside of the final
device that contains the following text: "Contains FCC ID: O9EM1213”
Grant Notes:
Modular transmitter. Power listed is conducted. This device is to be used only for mobile and
fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. The antenna(s) used for this transmitter must not exceed a
gain of 3dBi for mobile operation and 7dBi for fixed operation. Users and OEM integrators must be
provided with antenna installation instructions and transmitter operating conditions for satisfying RF
exposure compliance. OEM must also be provided with labeling instructions. This device contains
900 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for
900 MHz PCS operations.
confidential ©
Page :
25 / 29
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
