WM_MKT_Fastrack_UGD_001 - 002
September 2002
4 Testing the configuration of Fastrack
Following table contains AT commands. Use these commands to perform initial tests of the modem
configuration.
Table 13: Testing Fastrack configuration
Task
AT commands
Module
Comments
OK
PIN Code accepted
+CME ERROR: 16
Incorrect PIN Code
(with +CMEE = 1 mode)
Enter PIN Code
AT+CPIN=1234
+CME ERROR: 3
PIN already entered
(with +CMEE = 1 mode)
CREG=<mode>, 1
Modem synchronized on the
network
CREG=<mode>, 2
Synchronization lost,
resynchronization attempt
Module synchro
checking
AT+CREG ?
CREG=<mode>, 0
Modem not synchronized on the
network, no synchronization attempt
RING
Receiving an
incoming call
ATA
OK
Answer the call
Do not forget the «
;
» at the end for
voice calls
OK Communication
established
CME ERROR: 11
PIN code not entered (with + CMEE
= 1 mode)
Initiate a call
ATD1234;
CME ERROR: 3
AOC credit exceeded or a
communication is already
established
Initiate an
emergency call
ATD112;
OK
Do not forget the «
;
» at the end for
voice calls
Communication
loss
NO
CARRIER
Hang up
ATH
OK
Store the
parameters in
E2P
AT&W
OK
Configuration settings are stored in
E2P
confidential ©
Page :
15 / 29
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
