WM_MKT_Fastrack_UGD_001 - 002
September 2002
Table 10: Pin assignment for Power Supply connector
Connector
Pins layout
Comments
4 pins
Micro-Fit 3.0™
1
2
3-4
V+BATTERY
GROUND
AUXI
Power
supply
NC
Order the 4 pins Micro-Fit 3.0™
from the supplier, Molex
2.4.2
LED function
The LED lights indicate the operational status of the modem. Refer to following table for a list of the
LED states.
Table 11: Operational states of Fastrack modem
MODEM is
LED light activity
Status of MODEM
flashing slowly
idle mode
connected to the network
ON
flashing rapidly
transmission mode
OFF
none
not connected to the network
2.4.3
External antenna
The external antenna connects to the modem via the SMA connector. Use an antenna with the
characteristics listed in following table.
Table 12: External antenna characteristics
Antenna frequency range
dual band GSM 900/1800 MHz antenna for M1203
or dual band GSM 900/1900 MHz antenna for M1213
or triple band GSM 900/1800/1900 MHz antenna for M1200 series
Impedance
50
Ω
Gain (a cable)
0 dBi
VSWR (a cable)
-10 dB
2.4.4
SIM interface
Fastrack modem requires Micro-SIM card and supports 3V and 5V SIM cards. The SIM interface of
the Fastrack modem uses an extractible SIM card holder.
confidential ©
Page :
13 / 29
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.