manualshive.com logo in svg

Wave NCBSLXE2, Installation And Operation User Manual

Share
Download
Wave NCBSLXE2 Installation And Operation User Manual Download Page 28

SPEEDLAN Installation and Operation User Guide

 

4-2

Overview of Configurator

Installation and Setup

Windows 95/98/NT 4.0 SPEEDLAN Configurator 

To install the SPEEDLAN Configurator, do the following:

1

Shut down all programs and applications. 

Note: 

The SPEEDLAN Configurator uses library files, which reside on your Windows 95/98/
NT 4.0 PC. If a program or application is open, the Setup will not install correctly. If the 
Configurator is not installed correctly, the brouter could be rendered and inoperable 
after saving a configuration. 

2

Insert the CD into your floppy drive (i.e., Drive E, F, etc.). 

3

If the 

setup.exe 

program does not execute automatically, click 

Start

 + 

Run

. The Run dia-

log box appears. Click 

Browse

 and locate the setup.exe where your CD-ROM drive is 

located. Then, click 

Open

 and 

OK

. 

4

Follow the installation prompts. 

5

After the installation is complete, restart your computer. 

Toolbar and Menus

File Menu 

The Windows 95/98/NT 4.0 Configurator will configure either a remote Flash ROM in the brouters 
or configure a SPEEDLAN file saved on your computer. You can configure a SPEEDLAN file on your 
computer and download it to the brouters later after you have verified that all settings are correct. 
This can make reconfiguring your brouter a quick operation if you have the completed configuration 
already saved to your computer. 

Configuring a SPEEDLAN Brouter 

To configure a remote (network attached) brouter, you can use the Open Remote Config and Save 
functions. You must have a brouter configuration opened with the Configuration Utility before any 
configuration functions are performed. After you have opened the remote device and configured it, 
you can then save your configuration back to the open device. When you `Save' back to the remote 
device, its Flash ROM will be erased and reprogrammed with the new configuration. After you save 
the configuration, wait the required 15-second period. This allows the Flash ROM to be fully 
programmed and enables the brouter to reboot with the new configuration. 

        
  
  
 

Summary of Contents for NCBSLXE2
































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands