wattstopper CI-305 Installation Instructions Manual Download Page 12

Catalog # 

Description

  CI-305 

Passive Infrared Occupancy Sensor, Low Voltage,  

 

360° lens, up to 1200 square ft.

  CI-305-1 

Passive Infrared Occupancy Sensor, Low Voltage,  

 

360° high density/reduced range lens, up to 500 square ft.

  CI-300 

Passive Infrared Occupancy Sensor, Low Voltage, 

 

360° lens, up to 1200 square ft.,  

 

w/Isolated Relay and light level sensor

  CI-300-1 

Passive Infrared Occupancy Sensor, Low Voltage, 

 

360° high density/reduced range lens, up to 500 square ft.,  

 

w/Isolated Relay and light level sensor

  BZ-50 

Power Pack: 120/277VAC, 50/60Hz, 225mA,  20A ballast    

                                         or incandescent, 1HP@120/250VAC
  BZ-150 

Power Pack: 120/277VAC, 50/60Hz, 225mA,  20A ballast    

                                         or incandescent, 1HP@120/250VAC
  S120/277/347E-P 

Auxiliary Relay Pack:   120/277VAC, 60Hz, 20A Ballast 

 

 

347VAC, 60Hz, 15A Ballast

ORDERING INFORMATION

WARRANTY INFORMATION

WattStopper warranties its products to be free of defects in materials 

and workmanship for a period of five (5) years. There are no obligations 

or liabilities on the part of WattStopper for consequential damages 

arising out of, or in connection with, the use or performance of this 

product or other indirect damages with respect to loss of property, 

revenue or profit, or cost of removal, installation or reinstallation.

Please 

Recycle

2800 De La Cruz Boulevard, Santa Clara, CA 95050

Technical Support: 800.879.8585 • www.wattstopper.com

2800 De La Cruz Boulevard, Santa Clara, CA 95050 

Technical Support: 800.879.8585 

www.wattstopper.com 

17023r2 3/2013

All sensors are white.
BZ series power packs supply power for up to 14 CI-305 sensors.

Please 

Recycle

Summary of Contents for CI-305













Reviews: