![background image](http://html1.mh-extra.com/html/watts/lync-element-q/lync-element-q_installation-and-operation-manual_3835369110.webp)
Element
Operation and Maintenance
L-OMM-0003_A
• 10/8/2021 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
110
of
157
12
DIGITEMP JR. MIXING VALVE
12.1 Description
DigiTemp Jr is a digital mixing valve that provides user-directed control and monitoring water
distribution. It includes an electronic Control Module featuring a color touch screen digital
display to select desired outlet water temperature, an electronically actuated valve that mixes
hot and cold water, a quick response temperature sensor and check valves. DigiTemp Jr
monitors mixed outlet temperature. It also features a user programmable high temperature
Sanitization mode to help limit water borne bacteria as part of a user-directed and controlled
thermal eradication protocol.
Adjustment of DigiTemp Jr is the responsibility of the owner and installer and must be done by
qualified personnel in accordance with the manufacturer’s instructions, and complying with all
governmental requirements, building and construction codes and standards. It is recommended
to install the Element as part of an ASSE compliant water distribution system, including mixing
valves and/or temperature limiting devices at all point-of-use fixtures (faucets, sinks, tubs,
showers, etc.) that are approved to ASSE 1016, 1069, 1070 and 1071.
The DigiTemp Jr owner/user is responsible for maintaining proper water quality and condition,
and deciding what temperature is appropriate for distribution users and facility.
Figure 82
– DigiTemp Jr Valve.
Note: Controller is detached from and placed in the front of the unit.
12.1.1 Repair
As a pre-installed subsystem of Element, the following is intended for repairing the DigiTemp Jr
valve and controller.