Watson-Marlow 630 U, Installation, Operating And Maintenance Manual

Page: 2 / 186

11.2 Wiring the US NEMA module 20
11.3 Wiring the NEMA module 20
11.4 Earth screening of control cables on NEMA module 20
11.5 Ethernet M12 connector screen connection 22
12 Start-up check list 23
13 Control wiring 24
13.1 Upper D-connector 24
13.2 Lower D-connector 24
13.3 Standard - 25 way D: Inputs and Outputs 24
13.4 Standard - 25 way D: power supply limits 32
13.5 N - Modules Standard and SCADA 32
13.6 Standard N - Module 33
13.7 SCADA N-Module 38
14 Control wiring 49
14.1 Pump external interface parameters 50
14.2 Features on the rear of the pump 51
14.3 IP31 Wiring connections 52
14.4 Sensor Wiring - IP31 52
14.5 IP66 Wiring - N Module 56
14.6 Input/output connectors - IP66 60
14.7 Network topology 62
15 Switching the pump on for the first time 63
15.1 Selecting the display language 63
15.2 First-time start-up defaults 65
16 Switching the pump on in subsequent power cycles 67
17 Mode menu 68
18 Manual 69
18.1 START 69
18.2 STOP 70
18.3 INCREASING AND DECREASING FLOW RATE 71
18.4 MAX FUNCTION (Manual mode only) 72
19 Flow calibration 73
19.1 Setting the flow calibration 73
2 m-630un-en-08