Watson Marlow Pumps 500 Series, Installation, Operating And Maintenance Manual

Page: 2 / 157

12.4 N Module and F Module 27
12.5 Input/output connectors 30
12.6 PROFINET® pump external interface parameters 32
12.7 Network topology 33
13 Switching the pump on for the first time 36
13.1 Selecting the display language 36
13.2 First-time start-up defaults 38
14 Switching the pump on in subsequent power cycles 40
15 Main menu 41
15.1 Security settings 42
15.2 General settings 52
15.3 Change mode 65
15.4 Control settings 66
15.5 Configure inputs 67
15.6 Help 72
16 Mode menu 73
17 Manual 74
17.1 Start 74
17.2 Stop 75
17.3 Increasing and decreasing flow rate 75
18 Flow calibration 77
18.1 Setting the flow calibration 77
19 PROFINET® mode 80
19.1 Behaviour on start up 80
19.2 Configure PROFINET® settings 80
19.3 PROFINET® mode 85
19.4 Pump parameters 85
19.5 GSDML compatibility guide 93
20 Dispense mode 94
20.1 Create a new recipe or edit a recipe 94
20.2 Create a new batch or edit a batch 98
20.3 Set the active batch 102
20.4 Start dispensing 104
20.5 Dispense settings 106
20.6 Dispense time delays diagram 110
21 Dispense with PROFINET® control 110
22 Sensors 110
22.1 Sensor wiring 111
22.2 Setting up the sensors 112
22.3 Start up delay 117
2 m-530pn-en-09 02-02-22