Watkiss Automation PowerSquare 200, User Manual

Page: 11 / 80

2 - How to Run the PowerSquare - Enter the Job Settings
Watkiss PowerSquare™200 User Manual
7
This set can be made into a book. See “Operate the PowerSquare offline” on
page 29.
Procedure
Job Setting for a Standard Paper Size
Job Setting for a Non-Standard Paper Size
The job setting is easier if you first select a standard paper size, then adjust the
settings as necessary.
If the Print Job is then follow this procedure
a standard paper size “Job Setting for a Standard Paper Size”
on page 7.
not a standard paper size “Job Setting for a Non-Standard Paper
Size” on page 7.
a saved job “Job Setting for a Saved Job” on page 8.
Step Action Information
1
Touch
BASIC .
2 Enter the paper size and
page direction. Touch
PAPER SIZE > PRESETS > A3
or
A4
.
(USA:
11x17
,
8.5x11
or
8.5x14
)
The
PAGE DIRECTION
is
PORTRAIT
.
If needed, touch
PAGE DIRECTION > LAND-
SCAPE
.
3 Enter the set thickness.
Touch
THICKNESS.
Enter the measured
value.
4 Enter the number of
stitches. Touch
STITCHES
and enter the number of
stitches.
5 Touch
CLOSE.
Step Action Information
1
Touch
BASIC .
2 Enter the paper size. Touch
PAPER SIZE
. Enter the dimensions of
the paper.
3 Enter the page direction. Touch
PAGE DIRECTION > LANDSCAPE
or
PORTRAIT
.
If the
PAGE DIRECTION
option is not availa-
ble, the
PAGE DIRECTION
cannot be
changed.