Watkiss Automation PowerSquare 200, User Manual

Page: 43 / 80

5 - Error Conditions, Problems and Solutions - Book Quality
Watkiss PowerSquare™200 User Manual
39
The trimmed edge is
of bad quality The trimmer blade is
blunt or damaged. Call your Watkiss service engi-
neer.
The stitch is not on
the centre-line of the
spine The wrong paper size
was entered on the
touch screen. Measure the paper and enter the
correct dimensions.
The PowerSquare
adjustment system is
not calibrated correctly. Touch
RE-REF
in the
PAPER
SIZE
window to calibrate the
PowerSquare adjustment axes.
See “RE-REF” on page 18.
The books do not
stack on the stacker The collection table is in
the wrong position. Adjust the position of the collec-
tion table to fit the size of the fin-
ished book. See “Adjust the
Stacker Collection Table” on
page 27.
The book cover is
dirty or marked The former roller is dirty. Clean the former roller. See
“Clean the Former Roller” on
page 58
The former clamp is
dirty. See “Clean the the Polyurethane
Strips in the Form Clamp” on
page 59.
Book Quality
Problem
Cause Solution