Watkiss Automation PowerSquare 200, User Manual

Page: 8 / 80

1 - Introduction to the Watkiss PowerSquare™200 - Description of the PowerSquare
4
Watkiss PowerSquare™200 User Manual
The Rear Panel of the PowerSquare
Component - Function Table
Component Function
Rating and serial label The rating label displays the type of machine, serial
number, power use and fuse information.
Mains power ON/OFF
switch The mains power ON/OFF switch turns ON or turns
OFF the PowerSquare. When you turn OFF the
PowerSquare, the current settings are stored.
Voltage advisory label The voltage advisory label tells the installer to refer
to the installation instructions before the
PowerSquare is connected to mains power. The
PowerSquare can be adjusted for one of several
different input voltages.
Fuses The fuses make sure the operator and the machine
are protected if there is an electrical problem or
short circuit.
Voltage label The voltage label is fitted to the PowerSquare dur-
ing the installation procedure. The voltage label dis-
plays the selected voltage.
Mains power input connec-
tor The mains power input connector is used to con-
nect the PowerSquare to mains electrical power.
FIGURE 3. The Rear Panel of the PowerSquare.
Rating and Serial Label
Mains Power ON/OFF Switch
Fuses
Mains Power Input Connector
Voltage Advisory Label
Voltage Label