Watkiss Automation PowerSquare 200, User Manual

Page: 6 / 80

1 - Introduction to the Watkiss PowerSquare™200 - Description of the PowerSquare
2
Watkiss PowerSquare™200 User Manual
Installation
Your PowerSquare must be installed by a Watkiss service engineer. Special
knowledge is needed to install the machine.
CAUTION Only connect the machine to a mains power supply of the correct voltage with a
good earth-connection. The correct machine-voltage is shown on the label at
the mains power supply input on the rear of the machine. If the machine is con-
nected to the wrong supply, the warranty is cancelled.
How to Get Help
If you have any questions or problems, refer to the problem solving section in
this manual (see “Error Conditions, Problems and Solutions” on page 31). Con-
tact your PowerSquare supplier for further help.
Description of the PowerSquare
Introduction
The PowerSquare operates online with digital printers to process sets of printed
pages into stitched books. The main parts are shown below.
Operator Side of the PowerSquare
FIGURE 1. Operator Side of the PowerSquare.
Stacker
Connecting Bridge
User Interface
PowerSquare