>
Vspeed Setting:
this option is selectable if the system is setup
for variable speed pump. These are the speeds if the user
manually presses the button. Use the MENU/LEFT/RIGHT buttons
to navigate to the appropriate field, then use the UP/DOWN
buttons to change the value. In this screen, “Prime” is for the start
up speed of the pump from OFF stage. Set the Prime duration to
zero minutes if prime is not needed.
>
Party Mode:
this is used to set up one button push that will turn
on multiple devices. In this screen use the UP/DOWN buttons to
select the pool mode, then press the MENU/RIGHT button to enter
the accessories selection menu. In the accessories selection menu
use the UP/DOWN buttons to navigate to an accessory then use
the MENU/RIGHT button to select or deselect the accessory. LEFT
button will go back to the previous screen.
>
Date-Time:
set up the date and time for the pool. With Date-Time
highlighted, press MENU/RIGHT to enter the Date-Time setting. In
this screen, pressing MENU/RIGHT will move and highlight fields
that the user can change; UP/DOWN to change the values and LEFT
to go back to the previous field or screen.
>
General Information:
displays general information of the pool.
With General Information highlighted, press MENU/RIGHT to enter
the General Information menu. Use LEFT to go back to the
previous screen.
>
Degree F/C:
Select to display the pool temperature in Celsius or
Fahrenheit. With Degree F/C highlighted, press MENU/RIGHT to
toggle the selection between Celsius or Fahrenheit.
>
Time Display:
display pool time in am/pm or 24-hour mode.
With Time Display highlighted, press MENU/RIGHT to toggle the
selection between am/pm or 24-hour selection.
>
Heat Source:
this option can only be changed if a Solar valve or
Heat Pump is selected in ‘Assign Output’, as shown below:
Then Heat Source can be configured for Gas, Solar, or Heat Pump
depending on which devices are configured in ‘User Control’.
With Heat Source highlighted, press MENU/RIGHT to choose the heat
source.
>
Languages:
to select the language for the pool display.
With Languages highlighted, press MENU/RIGHT to select a
specific language.
>
Reset Network:
this option clears the OASIS Wifi setting.
With “Reset Network” highlighted, press MENU or RIGHT buttons
to select the choice, then press LEFT or HOME buttons to execute.
•
Timers:
set up schedules to turn devices ON/OFF. The number
of functions shown in this screen is dependent on the number of
accessories that are used in the system. Highlight the “Timers”
selection and press the MENU/RIGHT button to enter the setting.
In this screen, use the UP/DOWN buttons to highlight the desired
function, then press the MENU/RIGHT button to enter. LEFT button
will go back to the previous screen.
There are four schedules for each function that the user can set,
MENU/RIGHT will move to the next field, LEFT will move to
previous field or previous screen, and UP/DOWN will change the
value of a highlighted field.
All schedules are defaulted to OFF and changed to ON if the
schedule duration is set to a non-zero time and with a date
selected. Any function that requires the main pump to turn on will
show the Speed setting for the pump in the schedule.
810-2110.0219
©2019 Waterway Plastics
2200 East Sturgis Road, Oxnard CA 93030 •
Phone 805.981.0262
• Fax 805.981.9403
www.waterwayplastics.com
Designed,
Engineered &
Manufactured
in the USA.
User Control
Timers
Installer Setup