1
2
QS3200 User’s Manual
Page 14
5.3
Shipping and Packaging Information
Should you need to ship the unit back to Waters Network Systems, please follow these instructions: Package the
unit carefully. It is recommended that you use the original container if available. Units should be wrapped in a
"bubble-wrap" plastic sheet or bag for shipping protection. (You may retain all connectors and this Installation
Guide.) CAUTION: Do not pack the unit in Styrofoam "popcorn" type packing material. This material may cause
electro-static shock damage to the unit.
Clearly mark the Return Material Authorization (RMA) number on the outside of the shipping container. Waters
Network Systems is not responsible for your return shipping charges.
Ship the package to:
Waters Network Systems
Attention: Customer Service
RMA Number: ______
2411 Seventh Street NW
Rochester, MN 55901
APPENDIX A: WARRANTY INFORMATION
Waters Network Systems warrants its products to be free from defects in materials and
workmanship for a limited lifetime from the date of shipment by Waters.
Waters Network Systems will repair or, at its option, replace components in the products that
prove to be defective at no charge other than shipping and handling, provided that the product is
returned pre-paid to Waters.
This warranty will not be effective if, in the opinion of Waters Network Systems, the product has
been damaged by misuse, misapplication, or as a result of service or modification other than by Waters.
Waters Network Systems reserves the right to make a charge for handling and inspecting any
product returned for warranty repair which turns out not to be faulty.
This device complies with Class A Part 15 the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received including the interference that may
cause.
CE NOTICE
Marking by the symbol
CE
indicates compliance of this equipment to the EMC directive of the European Community. Such marking
is indicative that this equipment meets or exceeds the following technical standards:
EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information Technology Equipment.
EN 60555-2: Disturbances in supply systems caused by household appliances and similar electrical equipment - Part 2:
Harmonics.
2002 Waters Network Systems. All rights reserved.
The information contained in this document is subject to change without prior notice.
All trademarks are the property of their respective owners.
