Waters Network Systems GSM2109-1009-8PoE User’s Manual
Page 99
Command Level
Description
Example
event smtp
[Link-UP|Link-
Down|Both]
I
Set port event for SMTP
switch(config)#interface
fastethernet 3
switch(config-if)#event smtp
both
show event
P
Display event selection
switch#show event
no event
device-cold- start
G
Disable cold start event type
switch(config)#no event
device-cold-start
no event
authentication-
failure
G
Disable authentication failure
event type
switch(config)#no event
authentication-failure
no event X -
-ring-topology-
change
G
Disable X- ring topology event
switch(config)#no event X -
-ring-topology-change
no event
systemlog
I
Disable port event for system log
switch(config)#interface
fastethernet 3
switch(config-if)#no event
systemlog
no event smpt
I
Disable port event for SMTP
switch(config)#interface
fastethernet 3
switch(config-if)#no event smtp
show systemlog
P
Display system log client &
server information
switch#show systemlog
The following table lists the
SNTP Commands
.
Command Level
Description
Example
sntp enable
G
Enable SNTP function
switch(config)#sntp enable
sntp daylight
G
Enable daylight savings time. If
SNTP function is disabled, this
command can’t be applied.
switch(config)#sntp daylight
sntp
daylight-period
[Start time] [End
time]
G
Set period of daylight savings
time. If SNTP function is
disabled, this command can’t be
applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)# sntp
daylight-period
20060101-01:01
20060202-01-01
sntp
daylight-offset
[Minute]
G
Set offset of daylight saving time.
If SNTP function is disabled, this
command can’t be applied.
switch(config)#sntp
daylight-offset 3
sntp ip
[IP]
G
Set SNTP server IP. If SNTP
function is disabled, this
command can’t be applied.
switch(config)#sntp ip
192.169.1.1
sntp timezone
[Timezone]
G
Set timezone index, use the
show sntp timzezone command
switch(config)#sntp timezone
22