Waters Network Systems GSM2109-1009-8PoE User’s Manual
Page 89
Command Level
Description
Example
[UntaggedVID]
tag
[TaggedVID
List]
trunk 3 hybrid-link untag 5
tag 6-8
show vlan
[GroupID]
or
show vlan
V
Show VLAN information
switch(vlan)#show vlan 23
no vlan group
[GroupID]
V
Delete port based group ID
switch(vlan)#no vlan group
2
The following table lists the Spanning Tree Commands.
Command Level
Description
Example
spanning-tree
enable
G
Enable spanning tree
switch(config)#spanning-
tree enable
spanning-tree
priority
[0~61440]
G
Configure spanning tree
priority parameter
switch(config)#spanning-
tree priority 32767
spanning-tree
max-age
[seconds]
G
Use the spanning-tree
max-age global configuration
command to change the
interval between messages
the spanning tree receives
from the root switch. If a
switch does not receive a
bridge protocol data unit
(BPDU) message from the
root switch within this interval,
it will recompute the Spanning
Tree Protocol (STP) topology.
switch(config)#
spanning-tree max-age 15
spanning-tree
hello-time
[seconds]
G
Use the spanning-tree
hello-time global configuration
command to specify the
interval between hello bridge
protocol data units (BPDUs).
switch(config)#spanning-
tree hello-time 3
spanning-tree
forward-time
[seconds]
G
Use the spanning-tree
forward-time global
configuration command to set
the forwarding-time for the
specified spanning-tree
instances. The forwarding
switch(config)#
spanning-tree forward-time
20
