![background image](http://html1.mh-extra.com/html/waters-network-systems/gsm-2124/gsm-2124_operating-manual_3674677021.webp)
Waters Network Systems
User’s Manual
Page 21
GSM-2116 and GSM-2124
5.0 Web Based Management
This section illustrates the configuration and management of the GSM switch through a web
interface. Management through the web interface allows you to easily access and monitor the
switch through any port.
The default values of the managed switch are listed in the table below:
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.254
Username
admin
Password
admin
Table 5-1
Once the GSM switch has been configured via the switch’s serial interface, you are ready to use
the web management function. You must be connected to the switch via one of the Ethernet
ports.
Access your web browser, and type in
http://192.168.1.1
(or the assigned IP address) in the
address field. The login screen will be displayed. (see Figure 3-1) requesting the username and
password for login authentication. The default username and password are both “admin”. Click
on the
Login
button. The login process now is completed.
If you forget the password, click the link
Forget Password
in WebUI (See Figure 5-1) or input
“Ctrl+Z” in from the CLI’s login screen. The system will display a serial number. Write down this
serial number and contact your vendor. The vendor will provide you with a temporary password.
Use this new password as ID and Password to temporarily login. This new password is a
limited use password and will only allow you log into the system one time. Therefore, modify
your password one you login to the system.
The switch supports a simple user management function allowing only one administrator to
configure the system at a time. If there are two or more users using administrator’s identity, the
switch will allow the one who logins first to configure the system. The rest of users, even with
administrator’s identity, can only monitor the system. Without administrator’s identity, you can
only monitor the system.
A maximum of three users are able to login simultaneously in the switch. To optimize the display
effect, we recommend you use Microsoft IE 6.0 and above as your web browser.