![background image](http://html1.mh-extra.com/html/waters-network-systems/gsm-2124/gsm-2124_operating-manual_3674677109.webp)
Waters Network Systems
User’s Manual
Page 109
GSM-2116 and GSM-2124
Command Syntax
Description
Argument
Possible
Value
current configuration into the
non-volatile FLASH as the user-
defined configuration.
Local Commands
802.1x
Set max-
request
set max-
request <port-
range> <times>
This command sets the number
of times the state machine will
retransmit an EAP request
packet to the Supplicant before
it times out the authentication
session.
<port range>: syntax
1, 5-7, available from
1 to 16 (24)
<times>: max-times,
range 1-10
<port range> 1
to 16 (24)
<times>: 1-10,
default is 2
Set mode
set mode
<port-range>
<mode>
This command is used to set up
the 802.1x authentication mode
of each port
<port range>: syntax,
1, 5-7, available from
1 to 16 (24)
<mode>: set up
802.1x mode
0:disable the 802.1x
function
1:set 802.1x to
multihost mode
<port range>: 1
to 16 (24)
<mode>: 0 or 1
Set port-
control
set port-control
<port-range>
Use this command to set up the
802.1x status of each port
<port range>: syntax
1, 5-7, available from
1 to 16 (24)
<authorized>: set up
the status of each
port
0:ForceUnauthorized
1:ForceAuthorized
2:Auto
<port range>: 1
to 16 (24)
<authorized>:
0, 1 or 2
Set quiet
period
set quiet-period
<port-range>
>sec>
This command is used to define
periods of time when the
authenticator state machine will
not attempt to acquire a
supplicant.
<port range>: syntax
1, 5-7, available from
1 to 16 (24)
<sec>: timer, range
0-65535
<port range>: 1
to 16 (24)
<sec>:
0~65535,
default is 60
Set
reAuthEnabled
set
reauthenabled
>port range>
<ebl>
Use to define whether regular
reauthentication will take place
on a particular port
<port range>: syntax
1, 5-7, available 1 to
16 (24)
<ebl> : 0 :OFF
Disable
reauthentication
1 :ON Enable
reauthentication
<port range>: 1
to 16 (24)
<ebl>: 0 or 1,
default is 1
Set reAuthMax set reauthmax
Use to set the number of
reauthentication attempts that
are permitted before the port
becomes unauthorized.
<port range>: syntax
1, 5-7, available 1 to
16 (24)
<max> : max. value,
range 1-10
<port range> :
1 to 16 (24)
<max> : 1-10,
default is 2
Set
ReAuthPeriod
Set
reauthperiod
<port-range>
<sec>
This command sets a constant
that defines a non zero number
of seconds between periodic
reauthentication of the
supplicant.
<port range>: syntax
1, 5-7, available 1 to
16 (24)
<sec> : timer, range
1-65535
<port range>: 1
to 16 (24)
<sec> :
1~65535,
default is 3600