![background image](http://html1.mh-extra.com/html/waters-network-systems/gsm-2124/gsm-2124_operating-manual_3674677013.webp)
Waters Network Systems
User’s Manual
Page 13
GSM-2116 and GSM-2124
4.0 Network
Applications
There are three ways to access switch management functions:
1. RS-232 serial port connection (CLI)
2. Telnet
3. Web
Note:
Before accessing management functions through Telnet or the Web, you must modify the
IP address, subnet mask, default gateway and DNS through the RS-232 connection.
4.1
Using the RS-232 Serial Port Connection
To configure the switch via the RS-232 serial port connection, follow these steps:
1. Connect the serial cable included with your switch to your workstation.
2. Connect the serial cable to console connector on the back of your switch.
3. Run the terminal emulator (Example: HyperTerminal) using the following settings.
a. Baud rate (bits per second):
57600
b.
Data
bits:
8
c. Parity:
N
d.
Stop
bits:
1
e.
Flow
control:
None
4. When you complete the connection, press the
Enter
key.
5. Turn on the switch.
6. The default login is:
a. Username
=
admin
b. Password
=
admin
Figure 3-7 Attribute-based VLAN Diagram