Waters Network Systems
User’s Manual
Page 55
GSM-2116 and GSM-2124
1~4094.
Port:
The switch supports two options for managed valid port range, including
Any
and
Custom
. Default is
Any
.
You can select the ports that you would like them to be worked and restricted in the allowed group
configuration if
Custom
had been chosen.
Add:
A new entry of allowed group configuration can be created after the appropriate parameters
have been and then press
Add
.
Edit:
The existed entry also can be modified by using
Edit
.
Delete:
Remove the existed entry of allowed group configuration from the allowed group.
5.14 Maximum
Packet
Length
Function name:
Max. Packet Length
Function description:
The switch is capable of handling with 9k jumbo frames.
Parameter description:
Jumbo Frame(bytes):
Set up the maximum length of the packet that each port of the switch can accept. Maximum
length can be up to 1532 bytes or 9216 bytes. The default is 1532 bytes.
Figure 5.27 – Maximum Packet Length
5.15 DHCP
Boot
The DHCP Boot function is used to spread the request broadcast packet into a bigger time
frame to prevent the traffic congestion due to broadcast packets from many network devices