![background image](http://html1.mh-extra.com/html/black-box/servswitch/servswitch_installing-and-operating-information_2763530001.webp)
CUSTOMER
Order
toll-free
in the U.S.: Call
877-877-BBOX
(outside U.S. call
724-746-5500
)
SUPPORT
Free technical support 24 hrs a day, 7 days a week: Call
724-746-5500
or fax
724-746-0746
INFORMATION
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site:
www.blackbox.com
E-mail:
Installing and Operating the ServSwitch
™
Jr. LP
These directions are for a typical “direct plug-in” installation of a monitor, keyboard, and mouse to a PS/2
®
type CPU.
At the CPU end, the extension cables have 6-pin mini-DIN keyboard and mouse connectors.
If you have different types of equipment, or want to use different extension cabling, please call Black Box Tech support.
After making sure that your computers and
monitor are turned OFF:
Plug the video cable of your monitor
into the port on the rear panel of the
Jr. LP marked .
Plug your keyboard into the port in the
same area marked
.
Plug your mouse into the port in the same
area marked
.
Plug your speakers in the same area
marked
.
Attach the DB25 end of one of the PS/2 type
extension cables to the Jr. LP’s CPU 1 port.
Run this extension cable to the Video-
output, keyboard, mouse, and speaker
ports on the computer.
Repeat steps
and
for your other
computer, attaching the cable to the
Jr. LP’s CPU 2 port.
Now turn your computer and monitor ON.
The Jr. LP will turn ON automatically.
See the back of this sheet for a list of the ServSwitch™ Jr. LP’s keyboard commands.
BLACK BOX and the
logo are registered trademarks, and ServSwitch Jr. LP are trademarks, of Black Box Corporation.
Any other trademarks mentioned in this document are acknowledged to be the property of the trademark owners.
©
Copyright 2003. Black Box Corporation. All rights reserved.
RESET button
: Press
this to reinitialize the
Jr. LP and the keyboard
and mouse
STATUS LED
: Flickers
when the Jr. LP receives
data from the mouse or
keyboard
SELECT LEDs
:
Light to show
which CPU is
selected
POWER LEDs
:
Light to show that
the corresponding
CPU is powered up
SELECT button
:
Press this to
switch to the
other CPU
MAY 2003
SW621A-LP