T-365
Page 74 of 75
Reassembly - Lubrication
TC20 Power Take-Off
1.
Fill the PTO through the oil level hole or by removing the breather and
adding fluid through the opening. Any type of automatic PTO fluid
(ATF) may be used. Capacity is approximately 6 quarts. Fill to the
bottom of the threads in the oil level port.
2.
Re-check all fasteners for tightness.
3.
Check for fluid leaks.
1.
Fill the compressor sump with oil. Use ISO 68 viscosity oil. System
holds approximately 2 to 3 gallons. The oil level should be approxim
ately half way up the window in the sight glass.
2.
Also change the spin-on oil filters located on the air/oil separator and
oil cooler before starting up the system.
3.
Run the compressor for two minutes and re-check the oil level.
Do
Not Overfill.
4.
Check for fluid leaks.
Oil Level Sight Glass
Oil Fill
IL3009
Eclipse
t
ES CAFS Unit
Compressor Oil Sump