T-365
Page 23 of 75
Disassembly - Removal of Driveline from Case (Continued)
Removal of Drive (Input) Shaft
Pressing Out Drive Shaft
Step 1
Place case on a suitable press as shown with drive shaft removal
sleeve (Waterous Part No. 63431, see Page 6) installed under the
shift collar. Use suitable blocking to level the case.
Drive (Input) Shaft
Shift Collar
Use suitable blocking
to level case if cap is
left attached to case.
Drive Shaft Removal Sleeve
(Waterous Part No. 63431,
see Page 6)
CAUTION
If shaft has a retaining ring be
hind the shift collar, it must be
removed before shaft is
pressed out of the case. See
Page 22.
Step 2
Apply force to the drive (input) shaft in the direction shown to dis
engage shaft from case.
Drive (Input) Shaft
If desired, the cap may be
removed from the case,
see Page 28.