T-365
Page 46 of 75
Reassembly - Assemble Driveline Components
Drive Shaft
Drive Shaft Housing
Shift Fork Shoes
Drive Sprocket
Shift Fork
1.
Install one needle bearing in each end of the drive sprocket.
2.
Install needle bearing (larger radius edge first) just below bot
tom of chamfer on sprocket bore.
Install bearing
on shaft.
Bearing
O-ring, 4-3/4 x 5 in.
Housing
Oil Seal, 3-1/2 x 4-3/8 in.
1.
Install bearing in housing.
2.
Install O-ring on housing.
Coat with grease.
3.
Install oil seal in housing.
Install shoes in
shift fork.
Applying a dab
of grease to the
studs will help
the shoes re
main in the
fork.