WaterGroup 6200 SXT, Service Manual

Page: 3 / 36

Job Number: __________________
Model Number: ________________
Water Hardness: ___________________ ppm or gpg
Capacity Per Unit: ______________
Mineral Tank Size: ___________ Diameter: ___________ Height:
Salt Setting per Regeneration: ___________________________________
__________
1. Type of Timer:
A. Day Override B. Meter Initiated
2. Upflow
3. Meter Size:
A. 3/4” Std Range (125 - 2,100 gallon setting)
B. 3/4” Ext Range (625 - 10,625 gallon setting)
C. 1” Std Range (310 - 5,270 gallon setting)
D. 1” Ext Range (1,150 - 26,350 gallon setting)
E. Electronic________ Pulse Count ________ Meter Size
4. System Type:
A. Twin Tank (Softener)
B. Cabinet (Softener)
C. Filter
5. Timer Program Settings:
A. Brine and Slow Rinse: _________________________ Minutes
B. Backwash: __________________________________ Minutes
C. Rapid Rinse: _________________________________ Minutes
D. Brine Tank Refill: ______________________________ Minutes
6. Drain Line Flow Control: ____________ gpm
7. Brine Line Flow Controller: __________________ gpm
8. Injector Size#: _____________________
Valve Specifications
Valve material Fiber-reinforced ploymer
Inlet/Outlet 3/4” - 1” NPT, BSP, Sweat
Cycles Up to 5 cycles
Flow rates (50 psi Inlet) - Valve Alone (GPM)
Piston Standard Upflow
Continuous 21
Peak (25 psi drop) 26
Cv (flow at 1 psi drop) 5.5
Max. backwash (25 psi drop) 17
Max. Rapid Rinse (25 psi drop) 10
Regeneration
Downflow/Upflow Upflow only
Adjustable cycles Yes
Time available 199 minutes per cycle
Meter Information
Meter accuracy +1/-5% (.25 - 15GPM)
Meter capacity Range (gal). 1 - 60,000
Dimensions
Distributor pilot 1.05”
Drain line 1/2” NPT Quick Connect
Brine line 3/8” Quick Connect
Mounting base 2-1/2” NPSM
Height from top of tank 6.37”
Typical Applications
Water softener 6” - 16” diameter
Filters 6” - 16” diameter
Additional Information
Injector brine system 1610
Electrical rating 24 VAC, 50/60 Hz
Max. VA 15
Estimated shipping weight 11 lbs.
Pressure
Hydrostatic: 300 psi
Working: 20 - 125 psi
Temperature Range 34° - 110° F (1° - 43° C)
Job Specitication Sheet Valve Specifications
Tank
Diameter
Rein Volume
Injector
Size
BLFC
Size
US (FT
3
) Metric (Liters)
8 0.75 20 #00 0.125
9 25 #00 0.125
9 1.00 30 #00 0.125
10 1.25 35 #00 0.125
10 1.50 40 #00 0.125
12 45 #00 0.125
12 1.75 50 #00 0.125
12 2.00 55 #0 0.25
13 60 #0 0.25
13 2.25 65 #0 0.25
14 2.50 70 #1 0.25
14 75 #1 0.25
14 2.75 80 #1 0.25
14 3.00 85 #1 0.25
14 3.25 90 #2 0.50
14 95 #2 0.50
14 3.50 100 #2 0.50
16 3.75 105 #3 0.50
16 110 #3 0.50
16 4.00 115 #3 0.50
The chart to the left is for dealer use only. Use this informa-
tion to configure the system to suit the application.