Page 12
CK and EQ Manual
STEP 10CS
STEP 11CS
Step 10CS - Press
▲
or
▼
until RINSE appears. Press NEXT to go to Step 11CS. Press REGEN to
return to previous step.
Step 11CS - Press
▲
or
▼
until FILL appears. Press NEXT to go to Step 12CS. Press REGEN to return
to previous step.
Step 12CS - Press
▲
or
▼
until END appears. Press NEXT to exit OEM Cycle Sequence. Press
REGEN to return to previous step.
RETURN TO NORMAL MODE
STEP 12CS
STEP 9CS
Step 9CS - Press
▲
or
▼
until Regenerant Draw DN appears. Prior to selecting the upflow regeneration
cycle, verify that the correct body, main piston, regenerant piston and stack are being used, and that the
injector plug(s) are in the correct location. Refer to the Service Manual for drawings and part numbers.
Press NEXT to go to Step 10CS. Press REGEN to return to previous step.
Step 8CS – Press
▲
or
▼
until BACKWASH appears. Press NEXT to go to Step 9CS. Press REGEN
to return to previous step.
STEP 8CS
Fill Units: if Step 2CS is set to 1.5, and FILL is part of the Regeneration Cycle Sequence,
FILL UNITS of MIN or kg can be selected.
Last Step of OEM Cycle Sequence
